25 µm features
at 5 µm resolution
±0.0006″ tolerances
typical, scales with part size
Ra 32 µin finish
native
What RIPL is

Finished-shape micro metal parts, from one process

Resin Infused Powder Lithography (RIPL™) builds the part layer by layer in 316L or 17-4PH stainless steel, then sinters it to wrought-equivalent tensile and yield strength. No tooling, no burrs, finished shape — features down to 25 microns on parts 2–5 mm in typical size.

1 to 100,000+
parts, same process

~24 h quote
2–4 week delivery

Articulating lattice screw, 316L stainless steel, as sintered. Millimetre rule for scale.
Articulating lattice screw, 316L stainless steel, as sintered. Millimetre rule for scale.
At the show

Three things to do at Booth 2817

1
Bring the part or the drawing. Engineers at the booth read STEP files on the spot and say what RIPL can and cannot do for it.
2

Handle the samples. Articulated graspers, multi-lumen tips, lattice screws and snake-joint links, each a single net-shape part.

3

Leave with a number. Quotes typically return within 24 hours of a STEP file.

Request a quote

Attach a STEP file and a quantity. Quotes typically return within 24 hours.
Show package

Get the Design Guide and the 17-4PH datasheet

Both PDFs in one email: wall minimums, aspect ratios and tolerance rules, plus the full 17-4PH mechanical characterization.

Trusted by startups, CDMOs, and Fortune 500 OEMs.
70+ companies served · ISO 13485

Explore the full site at triolabs.com →

Trio Labs · Morrisville, North Carolina